Design of Steel Structure (2180610) MCQ

MCQs of Connections

MCQ No - 1

Select the correct statement

(A) Material cost of a rivet is higher than that of a bolt.
(B) Tensile strength of a bolt is lesser than that of a rivet.
(C) Bolts are used as a temporary fastening whereas rivets are used as permanent fastenings.
(D) Riveting is less noisy than bolting.

C
MCQ No - 2

The effective length of a fillet weld should not be less than

(A) Two times the weld size
(B) Four times the weld size
(C) Six times the weld size
(D) Weld size

B
MCQ No - 3

When the bolts are subjected to reversal of stresses, the most suitable type of bolt is

(A) Black bolt
(B) Ordinary unfinished bolt
(C) Turned and fitted bolt
(D) High strength bolt

D
MCQ No - 4

Pick up the correct statement from the following:

(A) The minimum pitch should not be less than 2.5 times the nominal diameter of the bolt.
(B) The minimum pitch should not be less than 12 times the nominal diameter of the bolt.
(C) The maximum pitch should not exceed 10 times the thickness or 150 mm whichever is less in compression.
(D) All the above.

A
MCQ No - 5

In a tension member if one or more than one bolt holes are off the line, the failure of the member depends upon:

(A) Pitch
(B) Gauge
(C) Diameter of the bolt holes
(D) All the above

D