1. |
A tension member in which reversal of direct stress occurs due to loads other than wind or seismic forces,the maximum effective slenderness ratio is તણાવ સભ્ય જેમાં પવન અથવા સિસ્મિક બળ સિવાયના ભારને લીધે સીધા તાણનું વિપરીત પરિણામ આવે છે, મહત્તમ અસરકારક સ્લેન્ડરનેસ રેસીઓ
|
||||||||
Answer:
Option (a) |
2. |
A tension member subjected to stress reversal due to wind or earthquake forces, the permissible kL/r ratio is પવન અથવા ભૂકંપના દળોને લીધે તણાવ વિરુદ્ધ બનેલા તાણના સભ્ય, અનુચિત kL / r ગુણોત્તર
|
||||||||
Answer:
Option (b) |
3. |
The tensile stress in the material adjacent to a hole during the elastic stage will be , સ્થિતિસ્થાપક તબક્કા દરમિયાન છિદ્રની અડીને સામગ્રીમાં તાણ તણાવ હશે,
|
||||||||
Answer:
Option (c) |
4. |
An ISA 100 x 75 x 8 mm is used as a tension member and connected to 10 mm thick gusset plate by bolts. What is the maximum pitch of bolt આઇએસએ 100 x 75 x 8 મીમીનો ઉપયોગ તાણના સભ્ય તરીકે થાય છે અને બોલ્ટ્સ દ્વારા 10 મીમી જાડા ગસેટ પ્લેટ સાથે જોડાયેલ છે. બોલ્ટની મહત્તમ પિચ શું છે?
|
||||||||
Answer:
Option (b) |
5. |
Strength of tension member is mainly influenced by તણાવ સભ્યની શક્તિ મુખ્યત્વે કોના દ્વારા પ્રભાવિત છે
|
||||||||
Answer:
Option (b) |
6. |
In case of angle members , the lug angles and their connections to the gusset , shall be capable of developing strength not less than __ % in excess of the force in the outstanding leg of the member. એંગલ સભ્યોના કિસ્સામાં, લાગ એંગલ્સ અને ગસેટ સાથેના તેમના જોડાણો, સભ્યના બાકી પગમાં બળ કરતાં વધારે __% કરતા ઓછી શક્તિ વિકસાવવામાં સક્ષમ હશે.
|
||||||||
Answer:
Option (b) |
7. |
As long as the strength of tension member is governed by yielding of gross section , the efficiency is જ્યાં સુધી તણાવ સભ્યની તાકાત સ્થૂલ વિભાગના યીલ્ડ દ્વારા સંચાલિત થાય છે, કાર્યક્ષમતા છે
|
||||||||
Answer:
Option (a) |
8. |
Find Ag for ISA 100 x 75 x 6 mm આઇએસએ 100 x 75 x 6 મીમી માટે Ag શોધો
|
||||||||
Answer:
Option (c) |
9. |
Maximum effective slenderness ration for members always under tension હંમેશા તણાવ હેઠળ સભ્યો માટે મહત્તમ અસરકારક સ્લિન્ડરનેસ રેસીઓ
|
||||||||
Answer:
Option (d) |
10. |
Find gauge distance for ISA 100 x 75 x 8mm with longer leg connected to Gusset plate ગુસેટ પ્લેટ સાથે જોડાયેલા લાંબા પગ સાથે ISA 100 x 75 x 8mm માટે ગેજનું અંતર શોધો
|
||||||||
Answer:
Option (c) |