Basic Electronics (3110016) MCQs

MCQs of Field effect transistors (FET) and its biasing

Showing 71 to 80 out of 99 Questions
71.
In certain CS JFET amplifier, RD = 1 KΩ, RS = 560 Ω, VDD= 10 V and gm = 4500 μS. If the source resistor is completely bypassed, the voltage gain is ________
(a) 450
(b) 45
(c) 2.52
(d) 4.5
Answer:

Option (d)

72.
A certain common-source JFET has a voltage gain off 10. If the source bypass capacitor is removed, ____________
(a) The voltage gain will increase
(b) The transconductance will increase
(c) The voltage gain will decrease
(d) The Q-point will shift
Answer:

Option (c)

73.
A CS JFET amplifier has a load resistance of 10 KΩ and RD = 820 Ω. If gm = 5 mS and Vin= 500 mV, the output signal voltage is ________
(a) 2.05 V
(b) 25 V
(c) 0.5 V
(d) 1.89 V
Answer:

Option (d)

74.
A CS JFET amplifier has a load resistance of 10 KΩ and RD = 820 Ω. If gm = 5 mS and Vin= 500 mV, If load resistance is removed, the output voltage will ________
(a) Increase
(b) Decrease
(c) Stay the same
(d) Be zero
Answer:

Option (a)

75.
A D-MOSFET can operate in the
(a) Depletion mode only
(b) Enhancement mode only
(c) Depletion -mode or enhancement-mode
(d) Low impedance mode
Answer:

Option (c)

76.
When an n-channel D-MOSFET has ID > IDSS, it
(a) Will be destroyed
(b) Is operating in the depletion mode
(c) Is forward biased
(d) Is operating in the enhancement mode
Answer:

Option (d)

77.
The voltage gain of a D-MOSFET amplifier is dependent on
(a) RD
(b) RL
(c) gm
(d) all of the above
Answer:

Option (d)

78.
Which of the following devices revolutionized the computer industry?
(a) JFET
(b) D-MOSFET
(c) E-MOSFET
(d) Power FET
Answer:

Option (c)

79.
The voltage that turns on an EMOS device is the
(a) Gate-source cutoff voltage
(b) Pinchoff voltage
(c) Threshold voltage
(d) Knee voltage
Answer:

Option (c)

80.
Which of these may appear on the datasheet of an enhancement-mode MOSFET?
(a) VGS(TH)
(b) ID(ON)
(c) VGS(ON)
(d) All of the above
Answer:

Option (d)

Showing 71 to 80 out of 99 Questions