__________ is the process of assuring that all systems and components of a major piece of equipment, a process, a building or similar are designed, installed and tested according to the operational requirements of the owner or final client.

__________ is the process of evaluating a system or its component(s) with the intent to find whether it satisfies the specified requirements or not.

_____________ standard specified General Requirements for Type, Routine and Special Tests for transformer.

According to IS 2026: Part_1, Transformer tests shall be made at any ambient temperature between __________ °C and with cooling water (if required) at any temperature not exceeding _________ °C.

According to IS 2026: Part_1, Transformer tests shall be made at the __________, unless otherwise agreed between the manufacturer and the purchaser.

According to IS 2026: Part_1, If required than test results are to be corrected to a reference temperature __________ °C for oil-immersed transformers.

According to IS 2026: Part_1, different testes performed are mainly classified into __________ categories.

The tests done mainly on a prototype unit (any one unit) out of all manufactured units in a lot (same specification) is known as ___________ Test.

The tests done mainly on each and every unit out of all manufactured units in a lot is known as ___________ test.

If the tests are done as per _________ requirement to obtain special information useful to the user and specified in the tender is known as Special Test.