1. |
A discontinuity produced either by the tearing or fracture of the metal then it is known as
જયારે ધાતુ પ્લાસ્ટિક કન્ડીશનમાં હોય ત્યારે ધાતુ ફાટવાથી અને જયારે ધાતુ ઠંડી હોય ત્યારે ધાતુનું ભંગાણ થવાથી જે અસાતત્યપણું આવે છે અથવા વેલ્ડ મેટલનું અવિરટપણું તૂટી જાય છે તેને
|
||||||||
Answer:
Option (a) |
2. |
Following reason are responsible for the occurrence of the cracks
તિરાડો થવા માટે આમાં થી કઈ કારણ પર આધાર રાખે છે.
|
||||||||
Answer:
Option (d) |
3. |
Which of the defect is not of Distortion type
આમાં થી કઈ ડિફેક્ટ વિકૃતિનો પ્રકાર છે.
|
||||||||
Answer:
Option (b) |
4. |
Following reason are not responsible for the occurrence of the cracks
તિરાડો થવા માટે આમાં થી કઈ કારણ પર આધાર રાખતુ નથી
|
||||||||
Answer:
Option (c) |
5. |
If Electrode angle with the work surface is less than 70º to 80º then which type of defect occur
વેલ્ડીંગ દરમિયાન ઇલેક્ટ્રોડ અને દાગીનાની સપાટી વચ્ચે ૭૦º થી ૮૦º થી ઓછો ખૂણો હોય તો ક્યાં પ્રકારની ખામી હોય છે?
|
||||||||
Answer:
Option (c) |
6. |
The main reason for incomplete penetration is
અપૂરતું પેનીટ્રેશન માટે ક્યાં મુખ્ય કારણો છે?
|
||||||||
Answer:
Option (c) |
7. |
The defect caused due to the scale, corrosion, dust and dirt present on the surface of workpiece and electrode are
સુરફેસ વર્ક અને ઈલેક્ટ્રોડ ઉપર સ્લેગ, કાટ, કચરો અને અન્ય પદાર્થો વેલ્ડ મેટલ માં ભળી જવાથી કઈ પ્રકાર ની ખામી થઇ છે.
|
||||||||
Answer:
Option (d) |
8. |
Which defects are caused because of the wrong electrode, excessive current, longer arc, poor weldability of the base metal and improper welding technique
ઈલેટ્રોડની ખોટી પસંગી, વધારે કરંટ, લાંબી અર્ક, બેસ મેટલ પર નબળી વેલ્ડેબિલિટી અને ખોટી વેલ્ડીંગ પદ્ધતિ થી કઈ પ્રકાર નું ખામી થઇ છે?
|
||||||||
Answer:
Option (c) |
9. |
Which of the reason is not responsible for the poor fusion
નબળું એકીકરણ થવા માટે આમાં થી ક્યાર કારણ ઉપર આધાર રાખતું નથી.
|
||||||||
Answer:
Option (d) |
10. |
Which of the type is not of thermal distortion
આમાં થી કયું પ્રકાર થર્મલ વિકૃતિ નું નથી.
|
||||||||
Answer:
Option (a) |